ISOLASTIC T
Tar-Polyurethane Liquid Waterproofing Membrane. Used for waterproofing/ vapour-barrier protection of foundations, inverted roofs, ground floors, basement, split slab, slab on grade, car decks, tunnels. Coverage: Approx. 1 sq.m/kg/coat. Packing: 20 kg pail. (Note: NOT TO BE USED IN CONTACT WITH POTABLE WATER).
AQUATEK
Trowel-Applied Waterproof Membrane. Specially designed for water proofing of structurally sound concrete and masonry surface, both interior and exterior application. Heavy duty/industrial use directly under ceramic tiles, marbles conventional mortar beds or where subjected to point loading. Coverage/Packing: Approx. 4.25 sq.m/ 25 kg kit at 3 mm thick.
AQUAPRUF
Highly Flexible Cementitious Waterproofing. Used to provide a waterproof, chloride and carbon dioxide resistant flexible coating for concrete and masonry and as anti corrosion coating for steel decks. AQUAPRUF is also used as a waterproof undercoat for stain-sensitive marble and granite flooring. Coverage/Packing: Approx. 11 sq.m/18 kg pack at 1 mm thick (total 2 coats, 2 mm recommended).
BITUPAINT SB
Bituminous Protective Paint. Used as a waterproofing and dampproofing protective coating for below grade concrete structures such as retaining walls, foundation walls, ramps, copings, footings, tie-beams, 2-course floor slabs, vaults etc. It is also used for above grade structures such as copings, parapets, wall flashings etc. BITUPAINT SB can also be used as a concrete curing compound and an anti-corrosion protection for metal surface. Coverage: Approx. 6.4 sq.m/liter/coat. Packing: 20 liter pail and 210 liter drum.
ISOMASTIC - SB
Waterproofing Mastic, Trowel-Applied. Used for waterproofing of below grade concrete structures such as structural/foundation walls, floor slabs, blinding, footings and other concrete in contact with the ground. ISOMASTIC - SB  can also be used for repairing worn felt/asphalt roofs, parapets, flashings. Coverage: Approx: 1 liter/sq.m/coat at 750 microns DFT. Packing: 20 liter pail and 200 liter drum.
BITUPAINT FR

High Build Bituminous Coating, Fibre-Reinforced. Used for waterproofing of below grade concrete structures such as structural/foundation walls, floor slabs. blinding, footings and other concrete in contact with the ground. BITUPAINT FR  can also be used for repairing worn felt/asphalt roofs, parapets, flashings.  Coverage: Approx: 1 - 1.5 sq.m/liter/coat (500 - 750 microns DFT). Packing: 18 liter pail.

ROOF MASTIC
Trowel-Applied Waterproofing Mastic. Used for waterproofing of below grade concrete structures such as structural/foundation walls, floor slabs, building, footings and other concrete in contact with the ground. ROOF MASTIC can also be used for repairing worn felt/asphalt roofs, parapets, flashings. Coverage/Packing: Approx. 3.8 sq.m/coat/gallon, 20 sq.m/coat/20 liter pail (750 micron DFT).
BITULASTIC
Rubberized Asphalt Emulsion. For below grade waterproofing of structural walls, foundation walls, floor slabs, copings, footings, tie-beams, ramps, retaining walls etc. For above grade waterproofing of copings, parapets, roof coating and repairs. Dampproof membrane for sandwich construction. As an adhesive for wood mosaics, wood blocks, insulation board, expanded polystyrene. Coverage: Approx. 1 sq.m/liter/coat at 500 microns DFT (1 to 2 coats recommended). Packing: 20 liter pail and 200 liter drum.
BITUPAINT IS
High Build Emulsified Asphalt. Used for dampproofing of below grade concrete structures such as retaining walls, blinding, footings tie-beams etc. For above grade waterproofing of built-up concrete roofs, parapets, flashings on boundary walls etc. Coverage: Approx: 2 sq.m/liter/coat at 250 microns DFT (2 coats recommended). Packing: 5, 20, and 210 liter pack.
ISOFLEX
Liquid Applied Waterproofing Membrane, Acrylic-Based. Specially formulated for waterproofing of flat/pitched concrete roof and other cement-bonded substrate. It can also be applied over corrugated asbestos cement sheet or similar asbestos-free boards and bituminous felts. Coverage: Approx: 1 sq.m/kg/coat (2 - 3 coats recommended for a total of 1 - 1.5 mm DFT). Packing: 5 and 20 kg pack.
BITUPRIMER - S
High Penetration Asphalt Primer. Low viscosity asphalt blended with solvent designed as a penetrating sealer/prime coat over cast concrete and masonry. Coverage/Packing: Approx: 100 - 110 sq.m/20 liter pail.
BITUPAINT AL
Aluminum-Coloured Roof Coating. Used for waterproofing of exposed, above grade concrete and masonry such as roof, parapet walls, flashings, boundary walls etc. It can also be applied over corrugated metal roofs and worn asphalt felt or bituminous sheet membranes. BITUPAINT AL  is ideal as a final solar-reflective top coat over conventional black bitumen coating (e.g. BITUPAINT FR, ISOMASTIC SB, ROOFMASTIC) and tar-modified polyurethane coating
(ISOLASTIC - T). Coverage: Approx: 1 - 1.5 sq.m/liter/coat. Packing: 18 liter pail.

<< Back