| ISOCURE-WB |
Curing,
Sealing Compound.
Liquid white curing and sealing compound based on acrylic
resin emulsion and wetting agent. It is used to prevent
rapid evaporation of water from fresh concrete ensuring
uniform hydration. Coverage: 5 sq.m/liter, 1 coat for
curing and 2 coats for sealing. Packing: 20 liter pail
and 210 liter drum. |
| ISOCRYL
100 |
Curing,
Sealing Compound.
One component, liquid, high efficiency curing and sealing
compound for concrete. It consists of hard yet flexible
acrylic resin, solvent and pigments. Available in clear,
white pigmented and aluminized grade. Coverage: Generally
5 sq.m/liter, 1 - 2 coats (curing, sealing respectively).
Packing: 20 liter pail and 210 liter drum. |
| ISOCURE |
Wax-Based
Curing Compound.
One viscosity membrane forming liquid based on wax emulsion.
It is specially formulated for curing fresh concrete
immediately after finishing operations. Coverage: 5
sq.m/liter, 1 coat. Packing: 20 liter pail and 210 liter
drum. |
| RITARGEL |
Concrete
Surface Retarder.
Used to create exposed aggregate finishes on precast
panels, to roughen concrete walls, for subsequent plastering
and keying construction joints. Coverage: 6 - 12 sq.m/liter,
2-10 mm etch. Packing: 16 liter pail. |
| FORM
- KOTE |
Concrete
Form Release Agent.
Blend of synthetic and natural chemicals that employs
a quick release mechanism based on chemical reaction.
It is non-staining and contains rust inhibitor to protect
metal from corrosion. Coverage: 30 sq.m/liter/coat for
timber or wood, 50 - 60 sq.m/liter for steel and plastic.
Packing: 20 liter pail and 210 liter drum. |
| RELEASE
- WELL |
Release
Agent for White Cement Concrete.
Special blend of synthetic and natural chemicals that
employs a quick release mechanism based on chemical
reaction. It is non-staining and does not contain diesel
oil. Coverage: 30 sq.m/liter for wood, 50 - 60 sq.m/liter
for steel and plastic. Packing: 20 liter pail and 210
liter drum. |
| ISOREX-E |
Water-based
Form Release Agent.
Special blend of emulsified mineral oil and chemicals
and is designed for use on formworks to provide easy
release of concrete. Its release mechanism is based
on chemical reaction. Coverage: 50 - 70 sq.m/liter.
Packing: 20 liter pail and 210 liter drum. |
| ISOREX
UMO |
Universal
Mold Oil.
Special blend of mineral oils and chemical additives
and designed for use for quick easy stripping of concrete
formworks. Coverage: 20 - 60 sq.m./liter. Packing: 20
liter pail and 210 liter drum. |
| ISOLANE |
Penetrating
Silicone Sealer/Water-Repeller.
Silane-siloxane based penetrating/impregnating sealer
especially formulated for the treatment of exterior
concrete and masonry surfaces against water, alkali,
and chloride penetration. Coverage: 5 sq.m/liter/coat.
(2 coats recommended). Packing: 5, 20 and 200 liter
pack. |
| UREKOTE |
Polyurethane
Shutter Paint.
Liquid resin which reacts with moisture in the air to
form a tough waterproof and flexible coating that allows
forms especially wood, maximum re-usability. Coverage:
16 sq.m/liter. (2 coats recommended). Packing:
4.75 liter can. |
| ISOCRETE
110 |
Cementitous
Wall Putty.
Special blend of cement, micronized fillers, and polymer
additives that only require the addition of water at
the site to produce a high strength, water-resistant
and smooth finishing, levelling compound for concrete
walls, bricks and masonry surfaces. Built-in polymer
additives ensures excellent adhesion and long-term crack
resistance even at high ambient temperature. Coverage:
Approx. 1.6 sq.m/kg at 500 microns thickness. Packing:
5 and 25 kg pack |
| ISOMOULD |
Release
Agent.
Promotes a water repellent interface between concrete
and formwork resulting in a smooth, flat, unstained
surface. Its air release property minimize formation
of air voids and blemishes. Coverage: 20 - 60 sq.m/liter.
Packing: 20 liter pail and 200 liter drum. |
