ISOTHANE 100

Polyurethane Joint Sealant, Two Component. Designed for use in expansion, construction and control joints in concrete (pre-cast or cast-in-situ), masonry, window perimeter and suitable for use both interior and exterior exposure. Coverage/Packing: 4 liter kit ( A+B).

ISOTHANE 6040

Two-Part Tar-Urethane Joint Sealant. Used to seal and protect moving joints of all types. It will adhere to concrete, asphalt pavement and steel surfaces. It is designed for use in expansion, construction and control joints in concrete. (Note: NOT TO BE USED IN CONTACT WITH DRINKING WATER). Coverage/packing: 4 liter kit (A+B).

POXITHANE 6000

Heavy Duty Epoxy-Urethane Joint Sealant. Used to seal control, contraction or construction joints for interior or exterior floor slabs or pavements subject to moderate movement. It can also be used as a floating layer in crack-spanning coatings. Packing/Coverage: 4 liter kit (A+B).

ISOLASTIC 100

Flexibilized Epoxy Loop Detector and  Lighting Sealant. Used to encapsulate and seal horizontal loop detector cable slots in asphaltic concrete or Portland cement concrete pavements associated with traffic signal controllers, lighting and automatic gates or barricades. Coverage/Packing: 4 liter kit (A+B).

BRIMO KOL GUN GRADE 1659

A Solvent-Free, Two Component, Polysulphide-Based Sealant which forms a highly elastic, non-shrinking, seal that has excellent resistance to weathering, extremes of temperature, U. V. light, mechanical abrasion, and a wide variety of chemicals. Excellent sag resistance allows extensive use in vertical joints. Brimo-Kol resists dust and dirt, maintaining its colour throughout its life. (STANDARDS: EUROPEAN STANDARD ISO 11600, BRITISH STANDARD, B5 4254, FEDERAL SPECIFICATIONS. T T - S - 0027 E type 1.

BRIMO KOL POURING GRADE 1660

A Solvent-Free, Two Component, Polysulphide-Based Sealant which forms a highly elastic, non-shrinking, seal that has excellent resistance to weathering, extremes of temperature, U.V. light, mechanical abrasion, and a wide variety of chemicals, particularly: gasoline, jet fuel, oils and solvents. It is easy to apply (no sealant guns needed), self leveling and requires very little tooling. Brimo-Kol resists dust and dirt, maintaining its colour throughout its life. (STANDARDS: EUROPEAN STANDARD ISO 11600 - 1993, BRITISH STANDARDS BS 5212 - 1990, FEDERAL SPECIFICATIONS. T T - S - 0027 E type I SS - S 200D - 1984.

<< Back