| ISOPATCH |
| High
Build Patching Mortar.
Recommended for vertical and overhead patching of deteriorated
concrete structures such as cast-in-place walls, columns,
beam, soffits, bridges and others. Coverage: 16.4 liters.
Packing: 25 kg. |
| DURAPATCH |
| Polymer-Modified
Repair Mortar.
Used as a permanent repair mortar for reinstatement
of concrete structures such as columns, walls, beams,
ceilings, tunnels, sea walls and other application requiring
high early mechanical strength, abrasion resistance
and reduced permeability to liquids. Coverage: 14 liters.
Packing: 25 kg. |
| DURCRETE |
| Non-Shrink,
Micro-Concrete.
Specially formulated for permanent and durable repair
of large structural sections of concrete using form
and pour technique. It is also used wherever a self
leveling repair concrete is desired specially on heavily,
reinforced sections or difficult to access areas. Typical
applications are for repairing concrete columns, beams,
walls, foundations, sea-walls and structures requiring
rapid strength gain. For horizontal concrete repair,
use ISOCRETE 100. Coverage: 14.7 liters. Packing: 30
kg. |
| ISOPATCH-M |
Acrylic-Modified
Fairing Coat Mortar.
As a pore sealer to cover concrete surface defects such
as blowholes, mild honeycombings, sand runs, grout loss
bulging (due to shutter movement). As a thin render
0.5-3mm, thick on horizontal and vertical concrete surfaces.
As a thin repair mortar for leveling joint edges and
sides and to form finish joints and covings. Coverage:
17 liters. Packing: 25 kg. |
| ISOPOX-OH |
High
Build Epoxy, Repair Mortar.
Used wherever high mechanical/ chemical resistance and
permanent repair to spalled or deteriorated concrete
are required-soffits, columns, lintels, underside of
beams and roof slabs, tanks and pipe linings etc. Coverage/Packing:
8 liters (A+B+C). |
| ISOPOX
IH3010 |
.
|
| ISOPOX
EC MORTAR |
100%
Solids Epoxy System.
Used for floor resurfacing, spalled or cracked concrete
repair in acid tanks and sea walls, sewage lining, chemical
plants, machinery service areas, warehouse, service
stations and other areas where a high degree of abrasion/chemical
resistance and high strength is required. Coverage/Packing:
Approx. 0.84 sq.m/16 kg kit (A+B+C) at 10 mm thick.
|
| ISOPOX
-100 |
High
Strength Epoxy Mortar.
For durable repair of horizontal concrete surfaces such
as: industrial floors, bridge decks, concrete runways
and pavement. Used also as a bedding/gap filling dry
pack mortar and expansion joint repair. Coverage/Packing:
Approx. 7.4 - 7.6 liters/16 kg kit (A+B+C). |
| ISOPOX
-WP |
Epoxy
Putty.
Specially designed to level and smoothen surface imperfection,
voids and rough spots in concrete and other cement-bound
substrates. It is also used to seal small holes and
pitting on corroded steel. Coverage: Approx. 1.5 sq.m/2.5
kg at 1mm thick. Packing: 2.5 kg kit (A+B). |
| ISOPOX
-IR |
Epoxy
Resin Crack-Injection System.
Injection resin to restore and seal cracks in concrete
structures such as: wall, floors, columns, beams, waterways,
pavements and other mineral/cement-bound substrates.
It is also used for filling underneath floating tiles,
mortar and stones in walls, ceilings and floors. Coverage/Packing:
Approx. 2.4 liters/2.5 kg kit (A+B). |
| EAT
- RUST |
One-Component
Zinc-Rich Epoxy Primer.
Used as an anti-corrosion protection primer for steel
reinforcements and steel structures. Coverage: Approx.
10 sq.m/liter/coat at 45 microns DFT. Packing: 1 liter.
|
| ISOCRETE
- 100 |
Structural
Micro-Concrete.
Specially formulated for permanent repairing of horizontal
concrete structures requiring exceptional mechanical
properties, low water impermeability and rapid strength
gain. It can be applied at thickness ranging from 30
- 150 mm in one layer. ISOCRETE 100 can also be used
as a leveling mortar for concrete pile caps. Coverage/Packing:
14.3 liters/30 kg pack. |
| DURAZINC |
Zinc-Rich
Epoxy Primer. Two component.
Anti-corrosion primer for new, uncoated steel and as
a maintenance primer for old, zinc-coated steel substrates
such as columns, girder, trusses, manhole covers etc.
Coverage: Approx. 20.8 sq.m/2 liter kit at 50 microns
DFT. Packing: 2 liter kit (A+B). |
| PLEXIGROUT |
Flexible
Cementitious Grout.
Used to repair narrow cracks in masonry, plaster and
concrete structures with little or no movement. It is
also suitable for use in filling joints in hollow-core
precast concrete slab element. Coverage/Packing: 6.25
liters/10 kg pack, 12.5 liters/20 kg pack |
